.. Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at .. http://www.apache.org/licenses/LICENSE-2.0 .. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. .. _ci_guide: Using TVM's CI ============== .. contents:: :local: TVM primarily uses Jenkins for running Linux continuous integration (CI) tests on `branches `_ `pull requests `_ through a build configuration specified in a `Jenkinsfile `_. Jenkins is the only CI step that is codified to block merging. TVM is also tested minimally against Windows and MacOS using GitHub Actions. This page describes how contributors and committers can use TVM's CI to verify their code. You can read more about the design of TVM CI in the `tlc-pack/ci `_ repo. For Contributors ---------------- A standard CI run looks something like this viewed in `Jenkins' BlueOcean viewer `_. CI runs usually take a couple hours to complete and pull requests (PRs) cannot be merged before CI has successfully completed. To diagnose failing steps, click through to the failing pipeline stage then to the failing step to see the output logs. .. image:: https://github.com/tlc-pack/web-data/raw/main/images/contribute/ci.png :width: 800 :alt: The Jenkins UI for a CI run Debugging Failures ^^^^^^^^^^^^^^^^^^ When CI fails for some reason, there are several methods to diagnose the issue. Jenkins Logs """""""""""" .. |pytest| replace:: ``pytest`` .. _pytest: https://docs.pytest.org/en/6.2.x/ The first place to look for a failure is in the CI logs, follow the red Xs on the failing job to view the logs. Note: * Jenkins does not display the full log by default, at the top of the log viewer is a button "Show complete log" which will take you to a plaintext version of the log * |pytest|_ failures are summarized at the bottom of the log but you will likely need to scroll up to view the actual failure. Reproduce Failures """""""""""""""""" Most TVM Python tests run under |pytest|_ and can be run as described in :ref:`pr-testing`. Reporting Issues ^^^^^^^^^^^^^^^^ Issues with CI should be `reported on GitHub `_ with a link to the relevant jobs, commits, or PRs. For Maintainers --------------- This section discusses processes ran by TVM Maintainers. Procedures for Keeping CI Green ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This section talks about common procedures used to keep CI passing. Broken CI due to Simultaneous Merge """"""""""""""""""""""""""""""""""" Developers rely on the TVM CI to get signal on their PRs before merging. Occasionally, two different PRs can pass CI individually but break ``main`` when both land. This in turn causes an error to show up on an unrelated PR that is based on the broken commit(s). Broken commits can be identified `through GitHub `_ via the commit status icon or via `Jenkins `_. In these situations it is ultimately the responsibility of the TVM Committer who merged the PR to fix CI (others are encouraged to help). Typical responses to this situation are: 1. revert the offending commit 2. submit a forward fix to address the issue. It is up to the committer and commit author which option to choose. A broken CI affects all TVM developers and should be fixed as soon as possible, while a revert may be especially painful for the author of the offending PR when that PR is large. Dealing with Flakiness ^^^^^^^^^^^^^^^^^^^^^^ If you notice a failure on your PR that seems unrelated to your change, you should search [recent GitHub issues related to flaky tests](https://github.com/apache/tvm/issues?q=is%3Aissue+%5BCI+Problem%5D+Flaky+>) and [file a new issue](https://github.com/apache/tvm/issues/new?assignees=&labels=&template=ci-problem.md&title=%5BCI+Problem%5D+>) if you don't see any reports of the failure. If a certain test or class of tests affects several PRs or commits on `main` with flaky failures, the test should be disabled via [pytest's @xfail decorator](https://docs.pytest.org/en/6.2.x/skipping.html#xfail-mark-test-functions-as-expected-to-fail) with [`strict=False`](https://docs.pytest.org/en/6.2.x/skipping.html#strict-parameter) and the relevant issue linked in the disabling PR. .. code-block:: python @pytest.mark.xfail(strict=False, reason="Flaky test: https://github.com/apache/tvm/issues/1234") def test_something_flaky(): pass Then submit a PR as usual .. code-block:: bash git add git commit -m'[skip ci][ci] Disable flaky test: ```` See # ' gh pr create Skipping CI ^^^^^^^^^^^ For reverts and trivial forward fixes, adding ``[skip ci]`` to the revert's PR title will cause CI to shortcut and only run lint. Committers should take care that they only merge CI-skipped PRs to fix a failure on ``main`` and not in cases where the submitter wants to shortcut CI to merge a change faster. The PR title is checked when the build is first run (specifically during the lint step, so changes after that has run do not affect CI and will require the job to be re-triggered by another ``git push``). .. code-block:: bash # Revert HEAD commit, make sure to insert '[skip ci]' at the beginning of # the commit subject git revert HEAD git checkout -b my_fix # After you have pushed your branch, create a PR as usual. git push my_repo # Example: Skip CI on a branch with an existing PR # Adding this commit to an existing branch will cause a new CI run where # Jenkins is skipped git commit --allow-empty --message "[skip ci] Trigger skipped CI" git push my_repo Docker Images ^^^^^^^^^^^^^ Each CI job runs most of its work inside a Docker container, built from files in the `docker/ `_ folder. Updating a Docker Image Tag """"""""""""""""""""""""""" To update a tag, a new image needs to be built and uploaded to Docker Hub, then the image tags in `docker-images.ini `_ need to be updated to match the image tags on Docker Hub. Docker images are built automatically nightly via the `docker-images-ci `_, which uploads the built images to https://hub.docker.com/u/tlcpackstaging once they have passed CI. Post-merge CI runs on ``main`` build Docker images ad-hoc and upload them to the ``tlcpackstaging`` Docker Hub account as well. There is an auto-promotion process for ``tlcpackstaging`` Docker images to be moved to the ``tlcpack`` account. This means that image tags from ``tlcpackstaging`` can be used in CI and they will be automatically moved to ``tlcpack`` after a successful post-merge CI run on ``main``. So the steps to update the image are: 1. Merge a PR that changes the Dockerfiles under ``docker/`` or scripts in ``docker/install``. 2. Do either of: a. Wait for the post-merge CI build from the PR to complete and upload the newly built image to the `tlcpackstaging `_ Docker Hub. b. Wait for the nightly Docker image build to complete and upload the newly built image to the `tlcpackstaging `_ Docker Hub. 3. Find the newly uploaded image tag on the `tlcpackstaging `_ Docker Hub, for example ``20221208-070144-22ff38dff`` and update the tag in ``ci/jenkins/docker-images.ini`` to use the tlcpackstaging tag but under the tlcpack account, e.g. ``tlcpack/ci-arm:20221208-070144-22ff38dff``. Send in a PR with these changes and wait for it to run through CI to ensure the new images are valid. 4. Merge the ``docker-images.ini`` update PR. Once post-merge CI finishes running on ``main`` the ``tlcpackstaging`` tag will be re-uploaded to ``tlcpack`` automatically. Adding a New Docker Image """"""""""""""""""""""""" New docker images can be added to test TVM on a variety of platforms. Here are the steps for adding a new CI image: 1. Define the ``docker/Dockerfile.ci_foo`` and associated scripts in ``docker/install``. Create a PR containing only these changes (no ``Jenkinsfile`` changes). Example: https://github.com/apache/tvm/pull/12230/files 2. A committer verifies the image builds locally and then reviews/approves this PR. 3. A committer creates the ci-foo repos in https://hub.docker.com/u/tlcpack and https://hub.docker.com/u/tlcpackstaging. 4. Create a PR to create an ECR repo for the image in tlcpack/ci: https://github.com/tlc-pack/ci/pull/46/files 5. A committer creates and gets merged a PR to add the image to the ``Jenkinsfile`` Example: https://github.com/apache/tvm/pull/12369/files. **NOTE**: The PR must be opened from a branch in apache/tvm, not from a branch in a forked repo. 6. A committer adds this image to the daily docker rebuild/validation run in tlcpack. Example: https://github.com/tlc-pack/tlcpack/pull/131 ``ci-docker-staging`` ^^^^^^^^^^^^^^^^^^^^^ The `ci-docker-staging `_ branch is typically used to test updates to Docker images and ``Jenkinsfile`` changes. When running a build for a normal PR from a forked repository, Jenkins uses the code from the PR except for the ``Jenkinsfile`` itself, which comes from the base branch. When branches are built, the ``Jenkinsfile`` in the branch is used, so a committer with write access must push PRs to a branch in apache/tvm to properly test ``Jenkinsfile`` changes. If your PR makes changes to the ``Jenkinsfile``, make sure to @ a `committer `_ and ask them to push your PR as a branch to test the changes. CI Monitoring Rotation ^^^^^^^^^^^^^^^^^^^^^^ Some tests are also flaky and occasionally fail for reasons unrelated to the PR. The `CI monitoring rotation `_ watches for these failures and disables tests as necessary. It is the responsibility of those who wrote the test to ultimately fix and re-enable the test.